Mikron
Snap Action, Automatic Reset, Type : LU-10 & LU-11 Snap Action, Automatic / Manual Reset, Type : L-20, L-21, L-30 Snap Action, Automatic / Manual Reset, Type : LM-1, LM-2 Snap Action, Automatic / Manual Reset, Type : L-50, L-51, L-60
Snap Action, Automatic Reset, Type : LU-10 & LU-11
LU-10 Normally Closed, Automatic Reset LU-11 Normally Open, Automatic Reset Specifications Voltage Rating 250 VAC, 50 Hz Current Rating 60 A Operating Temp. 60 deg. C - 150 deg. C (In 10 deg. Increments) Tolerance +- 5deg. C Differential 5 deg. C to 50 deg. C Terminal Push On 4.8 x 0.5 mm Use Heat Sink Compound on sensing surface before mounting Thermal Cut-Out. Use Push On terminals only. Do not Solder the terminals.
Snap Action, Automatic / Manual Reset, Type : L-20, L-21, L-30
L-20 Normally Closed, Automatic Reset L-21 Normally Open, Automatic Reset L-30 Normally Closed, Manual Reset Specifications Voltage Rating 250 VAC, 50 Hz Current Rating 10 A Operating Temp. 60 deg. C - 150 deg. C (In 10 deg. Increments) at no load. Tolerance +- 5deg. C Differential 5 deg. C to 50 deg. C Terminal Push On 6.3 x 0.8 mm Contacts Double Brake Preferably use Heat Sink Compound on sensing surface before mounting Thermal Cut-Out. Use Push On terminals only. Do not Solder the terminals.
Snap Action, Automatic / Manual Reset, Type : LM-1, LM-2, LM-5
LM-1 Normally Closed, Automatic Reset LM-2 Normally Open, Automatic Reset LM-5 Normally Closed, Manual Reset Note : LM-5 can be reset manually only when Temperature drops 30% below its Operating Temperature. Specifications Voltage Rating 250 VAC, 50 Hz Current Rating 80 A Operating Temp. 50 deg. C - 150 deg. C (In 10 deg. Increments). Tolerance +- 5deg. C Differential 5 deg. C to 50 deg. C Terminal Push On 4.8 x 0.8 mm Contacts Double Brake Use Heat Sink Compound on sensing surface before mounting Thermal Cut-Out. Use Push On terminals only. Do not Solder the terminals.
Snap Action, Automatic / Manual Reset, Type : L-50, L-51, L-60
L-50 Normally Closed, Automatic Reset L-51 Normally Open, Automatic Reset L-60 Normally Closed, Manual Reset Note : L-60 can be reset manually only when Temperature drops 30% below its Operating Temperature. Specifications Voltage Rating 250 VAC, 50 Hz Current Rating 16 A Operating Temp. 60 deg. C - 150 deg. C (In 10 deg. Increments). Tolerance +- 5deg. C Differential 5 deg. C to 50 deg. C Terminal Screw Type Contacts Double Brake Use Heat Sink Compound on sensing surface before mounting Thermal Cut-Out.